Removed from a fully functional Tesla Rear Small Drive Unit to install an aftermarket inverter logic board. The OEM inverter logic board can be used with the Dynam Labs VCU+ and EV Controls T-2C systems, or to repair a failed board in a Tesla vehicle. You can also install a Rear SDU inverter board in a Front SDU inverter to allow the T-2C to control it (phase swap required). The current sensors are still attached, but may be damaged or need to be replaced. If damaged, we will include a new set of current sensors for you to install yourself.
Part number: 1034827-01-E REV01
Removed from a fully functional Tesla Rear Small Drive Unit to install an aftermarket inverter logic board. The OEM inverter logic board can be used with the Dynam Labs VCU+ and EV Controls T-2C systems, or to repair a failed board in a Tesla vehicle. You can also install a Rear SDU inverter board in a Front SDU inverter to allow the T-2C to control it (phase swap required). The current sensors are still attached, but may be damaged or need to be replaced. If damaged, we will include a new set of current sensors for you to install yourself.
Part number: 1034827-01-E REV01
